Crane Racing ignition module - TURBO

Still waiting for the solid lifters i mounted the Crane Racing Ignition module today. The module let you adjust the advance and to limit the rpm. This ignition module is fit for a turbo configuration.

The ignition module and the rotor which was not included in the kit

The rotor has a track that fits in to the groove in the crankshaft.

Fit the rotor onto the shaft and tighten with the screw and lock washer.

The first trial mounting of the ignition - This indicates that there will be a second because

The previous owner had destroyed the treads and fitted a bigger bolt without informing Crane.....

By using a Dremel the track was adjusted to fit the bigger bolt size.

And on it went - Align the 2 opening in the rotor vertically to fit the module.

The dip switch was changed to kick start and the module is installed ready to go.

Erik